zoomHover over image to zoom

GA702S option MP

DuPont™ ProClean® 1

prod_descrTechnical Data Sheet

DuPont™ ProClean® 1. Spunbond Polypropylene Isolation Gown. Tie Neck. Elastic Wrist. Yellow.

Full Part Number GA702SYL000100MPxx  (xx=size)  Help
Fabric DuPont™ ProClean® 1
Design Gown
Seam Serged
Color Yellow
Case Count 100 per case
Sizes Universal
Option Codes MP


DuPont™ ProClean® 1 isolation gowns are made to the high quality standards you have come to expect from DuPont. Each ProClean® 1 isolation gown is made from spunbond polypropylene fabric with anti-static treatment.
  • Tie Neck and Waist
  • Elastic Cuff
  • Meets 16 CFR Part 1610 Class 1 Flammability Raiting
  • Set-In Sleeves
  • Multi Pack - 10 gowns per bag; 10 bags per case
  • Yellow
Option Code Description Sizes Part Number
MP Multi Pack Universal GA702SYL000100MP


  • The isolation gown shall be constructed of a spunbond polypropylene fabric.
  • The isolation gown shall be yellow in color.
  • The isolation gown shall have serged seams.
  • The isolation gown shall have a tie neck closure.
  • The isolation gown shall have elastic wrists.
  • The isolation gown shall be non-sterile.
Size Sleeve Length Chest Width Length
Universal 22 1/2 28 1/2 46
  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.


Property Test Method Result Std Dev
Basis Weight ASTM D3776 0.6 oz/yd2
Wearing Apparel Flammability 16 CFR 1610 I Class
  • Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use.
  • Data presented does not comprise a product specification.

eloqua gating form

  • Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
  • Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of Dupont™ Tyvek® IsoClean®, Tyvek™ Micro-Clean® 2-1-2 and ProClean® garments, and DuPont™ ProShield® 10 and DuraTrac™ shoe covers. Notwithstanding, DuPont™ Tyvek® Micro-Clean® 2-1-2 and Duratrac™ shoe covers produced by Cardinal Health prior to May 2008 may contain dry crumb natural rubber latex.
  • Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637.