TYVEK

Chemical Protection & Cleanroom Products

GB702S option MP
GB702S option MP
GB702S option MP
GB702S option MP
Hover over image to zoom

DuPont™ ProClean® 2

GB702S option MP

DuPont™ ProClean® 2. Tri-Layer SMS Isolation Gown. Neck and Waist Tie. Elastic Wrist. Yellow.

Full Part Number :

GB702SYL000100MPxx  (xx=size)  Help

Fabric / Material :

DuPont™ ProClean® 2

Design :

Gown

Seam :

Serged

Color :

Yellow

Quantity/Box :

100 per case

Sizes :

Universal

Option Codes :

MP

DuPont™ ProClean® 2 isolation gowns are made to the high quality standards you have come to expect from DuPont. Each ProClean® 2 isolation gown is made from spunbond meltblown spunbond (SMS) fabric with anti-static treatment.

  • Tri-Layer SMS Fabric with Anti-Static Treatment
  • Set-In Sleeves
  • Tie Neck and Waist
  • Elastic wrists
  • Moderate Fluid Exposure
  • Multi Pack - 10 gowns per bag; 10 bags per case
  • Yellow

AVAILABLE OPTIONS

SPECIFICATIONS

  • The isolation gown shall be constructed of a SMS fabric.
  • The isolation gown shall be yellow in color.
  • The isolation gown shall have serged seams.
  • The isolation gown shall have a tie neck closure.
  • The isolation gown shall have elastic wrists.
  • The isolation gown shall be non-sterile.
sample_image

FINISHED DIMENSIONS

Size Sleeve Length Chest Width Length
Universal 22 1/2 28 1/2 46

ADDITIONAL EQUIPMENT NEEDED

  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.

PHYSICAL PROPERTIES

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Result Std Dev
Basis Weight ASTM D3776 0.7 oz/yd2
Impact penetration AATCC 42 <= 4.5 grams
Wearing Apparel Flammability 16 CFR 1610 I Class
Air Permeability ASTM D737 >= 50 cfm/ft2

CLEANROOM WARNINGS

  • Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
  • Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of Dupont™ Tyvek® IsoClean®, Tyvek™ Micro-Clean® 2-1-2 and ProClean® garments, and DuPont™ ProShield® 10 and DuraTrac™ shoe covers. Notwithstanding, DuPont™ Tyvek® Micro-Clean® 2-1-2 and Duratrac™ shoe covers produced by Cardinal Health prior to May 2008 may contain dry crumb natural rubber latex.
  • Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637.

SPECIAL WARNINGS

  • Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use.
  • Data presented does not comprise a product specification.