Chemical Protection & Cleanroom Products

GB703S option 0B
GB703S option 0B
GB703S option 0B
GB703S option 0B
Hover over image to zoom

DuPont™ ProClean® 2

GB703S option 0B

DuPont™ ProClean® 2. Procedure Gown. Hook and Loop Neck Closure. Knit Cuff. Non-sterile. Blue.

Full Part Number :

GB703SBUxx00250B  (xx=size)  Help

Fabric / Material :

DuPont™ ProClean® 2

Design :


Seam :


Color :


Quantity/Box :

25 per case

Sizes :

Universal, XL

Option Codes :


DuPont™ ProClean® 2 procedure gowns are made to the high quality standards you have come to expect from DuPont. Each ProClean® 2 procedure gown is made from nonwoven polyester cellulose fabric.

  • Nonwoven Polyester Cellulose Fabric
  • AAMI Static Decay Compliant
  • Fluid Repellent
  • Raglan Sleeves
  • Hook and Loop Neck Closure
  • Knit Cuffs
  • Blue



  • The procedure gown shall be constructed of a nonwoven polyester cellulose fabric.
  • The procedure gown shall be blue in color.
  • The procedure gown shall have serged seams.
  • The procedure gown shall have a hook and loop neck closure.
  • The procedure gown shall have knit cuffs.
  • The procedure gown shall be non-sterile.


Size Sleeve Length Length
Universal 32 46
XL 33 48


  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.


Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Result Std Dev
Basis Weight ASTM D3776 1.8 oz/yd2
Hydrostatic Head AATCC 127 >= 30 cm H2O
Impact penetration AATCC 42 <= 1.0 grams
Wearing Apparel Flammability 16 CFR 1610 I Class
Air Permeability ASTM D737 >= 20 cfm/ft2


  • Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
  • Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of Dupont™ Tyvek® IsoClean®, Tyvek™ Micro-Clean® 2-1-2 and ProClean® garments, and DuPont™ ProShield® 10 and DuraTrac™ shoe covers. Notwithstanding, DuPont™ Tyvek® Micro-Clean® 2-1-2 and Duratrac™ shoe covers produced by Cardinal Health prior to May 2008 may contain dry crumb natural rubber latex.
  • Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637.


  • Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use.
  • Data presented does not comprise a product specification.