Chemical Protection & Cleanroom Products

GB218S option 0B
GB218S option 0B
GB218S option 0B
GB218S option 0B
GB218S option 0B
Hover over image to zoom

DuPont™ ProClean® 2

GB218S option 0B

DuPont™ ProClean® 2. Protective Lab Coat with Traditional Collar, Pockets and Knit Cuffs. Blue.

Full Part Number :

GB218SBUxx00300B  (xx=size)  Help

Fabric / Material :

DuPont™ ProClean® 2

Design :


Seam :


Color :


Quantity/Box :

30 per case

Sizes :

MD, LG, XL, 2X

Option Codes :


DuPont™ ProClean® 2 lab coats are made to the high quality standards you have come to expect from DuPont. Each ProClean® 2 lab coat is made from spunbond meltblown spunbond (SMS) fabric with anti-static treatment.

  • Traditional Collar with Knit Cuffs
  • Raglan Sleeves
  • Square Snaps
  • Back Vent
  • Hanging Loop
  • Anti-Static Treated



  • The garment shall be constructed of a spun-bonded, meltblown, spun-bonded (SMS) nonwoven.
  • The garment shall be blue in color.
  • The garment shall be a labcoat design.
  • The garment shall have serged seams.
  • The garment shall have a traditional collar.
  • The garment shall have front snap closure.
  • The garment shall have 3 pockets.


Size Chest Width Length
MD 24.5 40
LG 26.5 42
XL 28.5 44
2X 30.5 46


  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.


Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Result Std Dev
Basis Weight ASTM D3776 1 oz/yd2
Hydrostatic Head AATCC 127 >= 30 cm H2O
Wearing Apparel Flammability 16 CFR 1610 I Class
Air Permeability ASTM D737 >= 30 cfm/ft2


  • Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
  • Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of Dupont™ Tyvek® IsoClean®, Tyvek™ Micro-Clean® 2-1-2 and ProClean® garments, and DuPont™ ProShield® 10 and DuraTrac™ shoe covers. Notwithstanding, DuPont™ Tyvek® Micro-Clean® 2-1-2 and Duratrac™ shoe covers produced by Cardinal Health prior to May 2008 may contain dry crumb natural rubber latex.
  • Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637.


  • Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use.
  • Data presented does not comprise a product specification.