Chemical Protection & Cleanroom Products

GC705W option 0S
GC705W option 0S
GC705W option 0S
GC705W option 0S
Hover over image to zoom

DuPont™ ProClean® 3

GC705W option 0S

DuPont™ ProClean® 3 Procedure Gown, Sterile. Blue. Size Extra Large

Full Part Number :

GC705WBUXL00280Sxx  (xx=size)  Help

Fabric / Material :

DuPont™ ProClean® 3

Design :


Seam :


Color :


Quantity/Box :

28 per case

Sizes :


Option Codes :


DuPont™ ProClean® 3 Sterile Procedure Gowns are made to the high quality standards you have come to expect from DuPont. Each ProClean® 3 Sterile Procedure Gown is made from spunbond meltblown spunbond (SMS) fabric with anti-static treatment.

  • Ethylene Oxide 10-6 Sterility Assurance Level
  • Meets ANSI/AAMI PB70:2012 Level III Performance Requirements
  • Meets 16 CFR Part 1610 Class 1 Flammability Raiting
  • Individually Packaged
  • Alcohol Repellent
  • Low Lint Generation
  • Set-In Sleeves
  • Generous Cut
  • Extra Long Velcro for Customized Neck Fit
  • Blue



  • The procedure gown shall be blue in color.
  • The procedure gown shall be constructed of SMS fabric with anti-static treatment.
  • The procedure gown shall have welded seams.
  • The procedure gown shall be sterile.
  • The procedure gown shall be packaged with one hand towel in overwrap
  • The procedure gown shall have extra long velcro for customized neck fit.


Size Sleeve Length Length
Universal 62 122


  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.


Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Result Std Dev
Basis Weight ASTM D3776 1.4 oz/yd2
Hydrostatic Head AATCC 127 ≥ 50 cm (base fabric)
Impact penetration AATCC 42 <= 1.0 grams (base fabric)


  • Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
  • Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of Dupont™ Tyvek® IsoClean®, Tyvek™ Micro-Clean® 2-1-2 and ProClean® garments, and DuPont™ ProShield® 10 and DuraTrac™ shoe covers. Notwithstanding, DuPont™ Tyvek® Micro-Clean® 2-1-2 and Duratrac™ shoe covers produced by Cardinal Health prior to May 2008 may contain dry crumb natural rubber latex.
  • Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637.


  • Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use.
  • Data presented does not comprise a product specification.