TYVEK

Chemical Protection & Cleanroom Products

Hover over image to zoom

DuPont™ ProShield® 60

NG500S WH

DuPont™ ProShield® 60 Sleeve. 18" Long. Elastic at Both Ends. Serged Seams. White.

Full Part Number :

NG500SWHxx0200yy (xx=size;yy=option code)  Help

Fabric / Material :

ProShield® 60

Design :

Sleeve

Seam :

Serged

Color :

White

Quantity/Box :

200 per case

Sizes :

00

Option Codes :

00

ProShield® 60 garments are suitable for protection against non-hazardous particles, light liquid splash and aerosols in many industrial applications. ProShield® 60 garments are made with a microporous film that is laminated to a spundbonded polypropylene substrate. Applications include: automotive refinishing, waste cleanup and remediation.

  • Elastic at both ends (bicep and wrist) for arm protection
  • 18" long
  • One size fits most

AVAILABLE OPTIONS

SPECIFICATIONS

  • The garment shall be constructed of DuPont™ ProShield® 60 -- a composite of microporous film and nonwoven fabric.
  • The garment shall be white in color.
  • The garment shall be a sleeve design.
  • The garment shall have serged seams.
  • The garment shall have elastic at both ends.
  • The garment shall have elastic wrists.
  • The garment shall be 18'' in length.
sample_image

FINISHED DIMENSIONS

Size Sleeve Length Wrist Opening Bicep Open
00 18 3/4 6 1/4 8 3/4

ADDITIONAL EQUIPMENT NEEDED

  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.

PHYSICAL PROPERTIES

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Result
Thickness ASTM D751 10 mils
Basis Weight ASTM D751 1.8 oz/yd2
Tear Resistance - Trap Tear (MD) ASTM D1117 11 lbf
Tear Resistance - Trap Tear (CD) ASTM D1117 7 lbf
Breaking Strength - Grab (MD) ASTM D5034 23 lbf
Breaking Strength - Grab (CD) ASTM D5034 11 lbf
Hydrostatic Head AATCC 127 68 inches H2O
Surface Resistivity (25°C / 55& RH) ASTM D257 1.0 x 10^9 ohms/square
Wearing Apparel Flammability 16 CFR 1610 Help Class 1

SPECIAL WARNINGS

  • *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
  • *Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek®400, Tyvek® 400 D, ProShield®, ProShield® 10, ProShield® 60, Tyvek® 400 FC, and ProShield® 70 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Tyvek® 500 and Tyvek® 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem® 2000 and Tychem® 4000 garments with taped seams.
  • *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the nature and level of hazards and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric. Please contact DuPont for specific data. These garments are intended for limited use and should be disposed of after single use. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc are damaged, end user should discontinue use of garment to avoid potential exposure.