zoomHover over image to zoom

P3452S GY

DuPont™ ProShield® 70

prod_descrTechnical Data Sheet
faqFAQ

DuPont™ ProShield® 70 Boot Cover with ProShield® 70 Skid-Resistant Sole. 10" High. Serged Seams. Gray.

Full Part Number P3452SGYxx0100yy (xx=size;yy=option code)  Help
Fabric ProShield® 70
Design Boot Cover
Seam Serged
Color Gray
Case Count 100 per case
Sizes 00
Option Codes 00

FEATURES & PRODUCTS DETAILS -P3452S GY

ProShield® 70 fabric, used exclusively for shoe and boot cover products, is a spunbonded polypropylene substrate that is coated with a low-density polyethylene film for enhanced skid resistance and barrier performance.
  • 10" boot cover with elastic top
  • ProShield® 70 sole material provides enhanced skid-resistance
  • One size fits most
Option Code Description Sizes Part Number
00 Standard 00 P3452SGYxx010000

SPECIFICATIONS

  • The garment shall be constructed of DuPont™ ProShield® 70 -- a fabric consisting of a coating with an embossed grid pattern applied to a nonwoven fabric.
  • The garment shall be gray in color.
  • The garment shall be a boot cover design.
  • The garment shall have serged seams.
  • The garment shall have an elastic opening.
  • The garment shall have a ProShield® 70 upper.
  • The garment shall have soles made of skid-resistant material.
  • The garment shall be 10™ high.
sample_image
Size Boot Length Boot Height
00 17 1/2 10
  • Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
  • This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.

FABRIC & CHEMICAL RESISTANCE DATA -P3452S GY

Property Test Method Result
Basis Weight ASTM D3776 2.5 oz/yd2
Tear Resistance - Trap Tear (MD) ASTM D1117 7 lbf
Tear Resistance - Trap Tear (CD) ASTM D1117 10 lbf
Breaking Strength - Grab (MD) ASTM D5034 29 lbf
Breaking Strength - Grab (CD) ASTM D5034 23 lbf
Wearing Apparel Flammability 16 CFR 1610 Help Class 1
Hazard / Chemical Name Cas Number Phase Normalized Break Through help
Hazard / Chemical Name Cas Number Phase Normalized Break Through
Animal Waste (non-hazardous; solid) unknown Solid May be Suitable for Use
Crude oil on wildlife mixture Liquid May be Suitable for Use
Dirt (general) unknown Solid May be Suitable for Use
Feces (solid) unknown Solid May be Suitable for Use
Grease (general) unknown Liquid May be Suitable for Use
Non-Hazardous Particles (larger than 1 micron in size) unknown Solid May be Suitable for Use
Sewage unknown Liquid May be Suitable for Use
Tar balls unknown Solid May be Suitable for Use
  • *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
  • *Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek®400, Tyvek® 400 D, ProShield®, ProShield® 10, ProShield® 60, Tyvek® 400 FC, and ProShield® 70 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Tyvek® 500 and Tyvek® 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem® 2000 and Tychem® 4000 garments with taped seams.
  • *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the nature and level of hazards and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric. Please contact DuPont for specific data. These garments are intended for limited use and should be disposed of after single use. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc are damaged, end user should discontinue use of garment to avoid potential exposure.

eloqua gating form