North America
Chemical Protection & Cleanroom Products
Hover over image to zoom
Print
DuPont™ Tyvek® 400
TY122S WH
DuPont™ Tyvek® 400 Coverall. Comfort Fit Design. Respirator Fit Hood. Elastic Wrists. Attached Skid-Resistant Boots. Elastic Waist. Serged Seams. White.
Full Part Number :
TY122SWHxx0025yy (xx=size;yy=option code) 
Fabric / Material :
Tyvek® 400
Design :
Coverall w/ Resp. Fit Hood, Elastic Wrists, Att. Skid-Resistant Boots
Seam :
Serged
Color :
White
Quantity/Box :
25 per case
Sizes :
SM/MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
Option Codes :
00, NF, VP
DUPONT™ SAFESPEC™ Terms of Use
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by :
1Choose your CHEMICAL or other HAZARDS
2View Permeation/Chemical Resistance Data
3View Matching Garments for Hazard Scenarios
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
1Choose your CHEMICAL or other HAZARDS
2View Permeation/Chemical Resistance Data
3View Matching Garments for Hazard Scenarios
Step 2 of 3
CHEMICAL COMPARISON
The table below shows the Normalized Breakthrough times of fabrics for the hazards selected. (Testing Details) You can find specific garments that protect against these hazards by clicking the 'Next' button below.
Done
Done
1Choose your CHEMICAL or other HAZARDS
2View Permeation/Chemical Resistance Data
3View Matching Garments for Hazard Scenarios
Step 3 of 3
Flammable Environments
Warning
If any of the following apply:
- A fire or electric arc is actively present in the work environment
- The work environment contains an uncontrollable flammable material between the Lower Explosive Limit (LEL) or Lower Flammable Limit (LFL) and the Upper Explosive Limit (UEL) or Upper Flammable Limit (UFL)
- The work environment has been subject to a breach or loss in containment of flammable material (flammable liquids, flammable vapors or combustible dusts)
- There is an uncontrolled fuel source available in the work environment (that may or may not have encountered an ignition source yet)
Please consider fire fighter PPE (personal protective equipment). Read more.
If none of these conditions apply but FR clothing is required in your working environment, close this box and proceed to the next question. Only fabrics that provide both chemical resistance to the hazards you have listed and protection during escape from a flash fire will be considered for your hazard scenario.
1choose-your-chemical-or-other-hazards
2view-permeation-data-or-chem-resistant-data
3view-matching-garments-for-hazard-scenario
step3of3
TY122S WH
Is Suitable For Hazard Scenario
TY122S WH
Is Not Suitable For Hazard Scenario
| Hazard | Fabric / Material | Seam | Design |
|---|
Compare All
YOU MAY WANT TO CONSIDER SIMILAR PRODUCTS RELATED TO TY122S WH
Matching Products (0)
Your hazard scenario did not produce any results. May we suggest:
- If you are searching multiple hazards at one time, try breaking your search into separate hazards by either creating a new scenario or unchecking Hazards in the pane to the left. SafeSPEC™ is trying to find one garment that can be used for all of your hazards. You may need to consider more than one garment.
- If you have a liquid or vapor chemical hazard, try searching the Chemical Resistance Database. This database will show you permeation data for all of the fabrics tested against a given hazard. Once you are able to determine a suitable fabric, you will have the flexibility of selecting a suitable garment design and seam construction yourself.
- If you answered "yes" to the question that you are working in an environment that requires flame resistant clothing, please note that although DuPont has several garment options for scenarios involving possible industrial fire or electric arc exposures as well as chemical exposure hazards, these garments may not have been tested against the specific chemical hazard(s) that you have selected or may have breakthrough times lower than your intended work duration. If possible, try to mitigate the need for flame resistant clothing by implementing engineering controls, work practices and administrative controls before resorting to protective clothing. Additionally, try breaking your search into separate hazards as suggested above in order to find garment options to meet your needs.
- If you selected "localized to the feet" for the direction of exposure question, you may want to consider chemical resistant boots instead of purchasing a full garment. DuPont does not manufacture or sell chemical resistant boots. However, we do offer some coveralls and encapsulated suits with attached socks. These socks can be worn as an extra layer of protection inside of chemical resistant boots.
If you still need help, please Contact Us.
For a general fabric overview, please view our
SELECT FROM SAVED SCENARIO
Please select the Scenario you have saved for the TY122S WH
Saved Scenario for TY122S WHTY122S WH Is Suitable For Hazard Scenario
TY122S WH Is Not Suitable For Hazard Scenario
| Hazard | Fabric / Material | Seam | Design |
|---|
For a general fabric overview, please view our
Tyvek® 400
Coverall w/ Collar, Elastic Wrists, Att. Skid-Resistant Boots, Serged Seams
Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.
- Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
- Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
- Longer zipper extends to chin for complete coverage of neck area
- Elastic opening for tighter fit at wrist
- Attached Tyvek® FC boots have special coating to provide added skid-resistance
AVAILABLE OPTIONS
Option Code
Description
Sizes
Part Number
00
Standard
SM/MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
TY122SWHxx002500
NF
NAFTA sourced
SM/MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
TY122SWHxx0025NF
VP
Iindividually packaged for PPE vending machines
SM/MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
TY122SWHxx0025VP
SPECIFICATIONS
- The garment shall be constructed of DuPont™ Tyvek® 400-- a patented flash-spun polyethylene fabric.
- The garment shall be white in color.
- The garment shall be a hooded coverall design.
- The garment shall have serged seams.
- The garment shall have a respirator fit hood with elastic around the face.
- The garment shall have a front zipper closure.
- The garment shall have an elastic waist.
- The garment shall be constructed in the comfort fit design.
- The garment shall have elastic wrists.
- The garment shall have elastic ankles and attached skid-resistant boots.
- The garment shall have soles made of skid-resistant material.
FINISHED DIMENSIONS
| Size | Sleeve Length | Chest Width | Inseam | Fits Chest | Fits Height | Inner Glove Size | Outer Glove Size |
|---|---|---|---|---|---|---|---|
| SM/MD | 33 1/2 | 25 | 28 | 36 3/4 - 40 1/4 | 5'0" - 5'7" | n/a | n/a |
| LG | 35 | 26 1/2 | 29 | 39 3/4 - 43 1/4 | 5'5" - 5'9" | n/a | n/a |
| XL | 36 1/2 | 28 | 29 1/2 | 42 3/4 - 46 1/4 | 5'8" - 6'2" | n/a | n/a |
| 2X | 38 | 29 1/4 | 30 1/2 | 45 1/4 - 48 3/4 | 6'0" - 6'4" | n/a | n/a |
| 3X | 38 | 31 1/4 | 31 1/2 | 49 1/4 - 52 3/4 | 6'2" - 6'4" | n/a | n/a |
| 4X | 38 1/2 | 33 | 32 1/2 | 52 3/4 - 56 1/4 | 6'4" - 6'7" | n/a | n/a |
| 5X | 39 1/2 | 34 1/2 | 33 1/2 | 55 3/4 - 59 1/4 | 6'7" - 6'10" | n/a | n/a |
| 6X | 41 | 36 1/4 | 34 1/2 | 59 1/4 - 62 3/4 | 6'9" - 7'1" | n/a | n/a |
| 7X | 42 | 37 1/2 | 35 1/2 | 61 3/4 - 65 1/4 | 7'0" - 7'4" | n/a | n/a |
ADDITIONAL EQUIPMENT NEEDED
- Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
PHYSICAL PROPERTIES
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
| Property | Test Method | Result |
|---|---|---|
| Thickness | ASTM D1777 | 5.9 mils |
| Basis Weight | ASTM D3776 | 1.2 oz/yd2 |
| Burst Strength - Mullen | ASTM D774 | 50 psi |
| Seam Strength | ASTM D1683 | > 19 lbf |
| Breaking Strength - Grab (MD) | ASTM D5034 | 18 lbf/in |
| Breaking Strength - Grab (CD) | ASTM D5034 | 22 lbf/in |
| Hydrostatic Head | AATCC 127 | 45 inches H2O |
| Surface Resistivity (25°C / 55& RH) | ASTM D257 | < 6.3 x 10^9 ohms/square |
| Wearing Apparel Flammability | 16 CFR 1610 |
Class 1 |
CHEMICAL RESISTANCE
| Hazard / Chemical Name | Cas Number | Phase | Normalized Break Through  |
|---|---|---|---|
| Animal Waste (non-hazardous; solid) | unknown | Solid | May be Suitable for Use |
| Asbestos (all forms) | 1332-21-4 | Solid | May be Suitable for Use |
| Beryllium | 7440-41-7 | Solid | May be Suitable for Use |
| Biological fluids w/ potentially infectious diseases | unknown | Liquid | May be Suitable for Use |
| Blood | unknown | Liquid | May be Suitable for Use |
| Blood w/ potentially infectious diseases | unknown | Liquid | May be Suitable for Use |
| Bodily fluids | unknown | Liquid | May be Suitable for Use |
| Bodily fluids w/ potentially infectious diseases | unknown | Liquid | May be Suitable for Use |
| Crude oil on wildlife | mixture | Liquid | May be Suitable for Use |
| Dirt (general) | unknown | Solid | May be Suitable for Use |
| Feces (solid) | unknown | Solid | May be Suitable for Use |
| Fertilizer (general; solid form) | unknown | Solid | May be Suitable for Use |
| Fiberglass | unknown | Solid | May be Suitable for Use |
| Fungicide (general; solid form) | unknown | Solid | May be Suitable for Use |
| Grease (general) | unknown | Liquid | May be Suitable for Use |
| Hazardous Particles (larger than 1 micron in size) | unknown | Solid | May be Suitable for Use |
| Herbicide (general; solid form) | unknown | Solid | May be Suitable for Use |
| Insecticide (general; solid form) | unknown | Solid | May be Suitable for Use |
| Lead | 7439-92-1 | Solid | May be Suitable for Use |
| Lime | mixture | Solid | May be Suitable for Use |
| Mold spores | unknown | Solid | May be Suitable for Use |
| Non-Hazardous Particles (larger than 1 micron in size) | unknown | Solid | May be Suitable for Use |
| Pesticide (general; solid form) | unknown | Solid | May be Suitable for Use |
| Radioactive particles | unknown | Solid | May be Suitable for Use |
| Sewage | unknown | Liquid | May be Suitable for Use |
| Tar balls | unknown | Solid | May be Suitable for Use |
SPECIAL WARNINGS
- *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
- *Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek®400, Tyvek® 400 D, ProShield®, ProShield® 10, ProShield® 60, Tyvek® 400 FC, and ProShield® 70 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Tyvek® 500 and Tyvek® 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem® 2000 and Tychem® 4000 garments with taped seams.
- Tyvek® 600 and Tyvek® 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek® 400 garments.
- **Garments made using Tyvek® 400, Tyvek® 500, Tyvek® 600 and Tyvek® 800J fabrics will burn and possibly melt. None of these garments should be worn near heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited to, Nomex® IIIA or Nomex® Comfort garments.
- *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the nature and level of hazards and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric. Please contact DuPont for specific data. These garments are intended for limited use and should be disposed of after single use. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc are damaged, end user should discontinue use of garment to avoid potential exposure.
Search by Hazard
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by Hazard
1Choose your CHEMICAL or other HAZARDS
1Hazard
2View Permeation/Chemical Resistance Data
2Data
3View Matching Garments for Hazard Scenarios
3Garments
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Important Note
The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials or additives or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
1Choose your CHEMICAL or other HAZARDS
1Hazard
2View Permeation/Chemical Resistance Data
2Data
3View Matching Garments for Hazard Scenarios
3Garments
Step 2 of 3
Print
Done
Done
CHEMICAL COMPARISON
1Choose your CHEMICAL or other HAZARDS
1Hazard
2View Permeation/Chemical Resistance Data
2Data
3View Matching Garments for Hazard Scenarios
3Garments
Step 3 of 3
Flammable Environments
1Search by Chemical Class / Sub-class
1Class
2View Permeation/Chemical Resistance Data
2Data
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical Class Name
Chemical or Other Hazard Name
| Class Name | Sub-class Name | Actions |
|---|
1Search by Chemical Class / Sub-class
1Class
2View Permeation/Chemical Resistance Data
2Data
Step 2 of 3
1Search by Fabric Name
1Material
2Fabric Comparison
2Data
Step 1 of 2
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Fabric Name
| Fabric / Material | Actions |
|---|
Search by Guide Me
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by Guide Me
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 1 of 4
GUIDE - INTRODUCTION
Use this garment selector tool if your hazard can not be found in our database or if you would like more flexibility in the garment selection process.
Given the limitless combinations of hazard scenarios, it is not possible for DuPont to have barrier test data for all of our fabrics against all the hazards for which you need to select appropriate chemical protective garments. This is where Guide can help.
Using the guidelines established in ASTM F1186 and/or the guidance given in the OSHA Technical Manual(2), the Guide product selector tool can help you navigate the garment selection process one step at a time. From defining your hazard and exposure level, to selecting appropriate fabrics, seams and designs, Guide can help you find suitable garments for your unique set of exposure conditions.
References:
1. ASTM Standard F1186-03(2008)e1, "Standard Classification System for Chemicals According to Functional Groups", ASTM International, West Conshohocken, PA, 2003, DOI: 10.1520/F1186-03R08E01, www.astm.org.
2.OSHA Technical Manual, Section VIII, Chapter 1, Chemical Protective Clothing, III(B)(5). U.S. Department of Labor. http://www.dol.gov.
Search by Guide Me
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 2 of 4
Define Your Hazard
Evaluate only one hazard at a time. A chemical mixture, even though it may have multiple ingredients, is considered one hazard.
Search by Hazard
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 3 of 4
Hazard Exposure
Terms of UseFlammable Environments
Search by Hazard
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 4 of 4
Select Your Fabric,Seam & Design
Fabric Options
Seam Options 
Design Options
Search by industry/tasks
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by industry/tasks
1Choose your industry task
1Task 1
2Hazard / Exposure Scenario
2Task 2
Step 1 of 2
Dupont personal protection provides a broad portfolio
Search by industry/tasks
1Choose your industry task
1Task 1
2Hazard / Exposure Scenario
2Task 2
Step 1 of 2
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Low temperature Liquid
Multiple Hazards Found
Please refine your selection:
Chemical or Other Hazard Name
or
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Search by industry/tasks
1Choose your industry task
1Task 1
2Hazard / Exposure Scenario
2Task 2
Step 2 of 2
Hazard Exposure
Terms of Use
Flammable Environments
SAVE SCENARIO
Please select a title for easy identification of the scenario you want to save
PLEASE NOTE:
All of the saved scenarios are going to be active only for 90 days.
You can save it again from the Saved Scenarios section from the Product Selector "Saved Scenarios" section from the Product Selector
Industry
Guide Me