North America
Chemical Protection & Cleanroom Products
Hover over image to zoom
Print
DuPont™ Tyvek® IsoClean®
IC501B option 0S
DuPont™ Tyvek® IsoClean® Sleeve. Bound Seams. Covered Elastic at Both Ends. 18" Long. White.
Certificates of Sterility Available Here
Full Part Number :
IC501BWHxx01000S (xx=size) 
Fabric / Material :
DuPont™ Tyvek® IsoClean® Sterile
Design :
Sleeve
Seam :
Bound
Color :
White
Quantity/Box :
100 per case
Sizes :
00
Option Codes :
0S
Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.
- Garments are gamma sterilized to SAL of 10-6
- Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
- Elastic at both ends (bicep and wrist) for arm protection
- 18" long
- One size fits most
- Full traceability on all sterilized apparel with Certificates of Sterility Available Here
AVAILABLE OPTIONS
Option Code
Description
Sizes
Part Number
0S
Sterile
00
IC501BWHxx01000S
SPECIFICATIONS
- The garment shall be constructed of DuPont™ Tyvek® 400-- a patented flash-spun polyethylene fabric.
- The garment shall be white in color.
- The garment shall be a sleeve design.
- The garment shall have bound seams.
- The garment shall have covered elastic at both openings.
- The garment shall be 18™ in length.
- The garment shall be sterile.
FINISHED DIMENSIONS
| Size | Sleeve Length | Wrist Opening | Bicep Open |
|---|---|---|---|
| 00 | 18 | 6 | 10 |
ADDITIONAL EQUIPMENT NEEDED
- Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
- This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.
PHYSICAL PROPERTIES
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
| Property | Test Method | Result | Std Dev |
|---|---|---|---|
| Basis Weight | ASTM D3776 | 1.24 oz/yd2 | 0.04 oz/yd2 |
| Burst Strength - Mullen | ASTM D774 | 42 psi | 8 psi |
| Breaking Strength - Grab (MD) | ASTM D5034 | 15 lbf | 3 lbf |
| Breaking Strength - Grab (CD) | ASTM D5034 | 18 lbf | 2 lbf |
| Hydrostatic Head | AATCC 127 | 80 cm H2O | 16 cm H2O |
| Surface Resistivity (25°C / 55& RH) | ASTM D257 | <6.3 X109 ohms/square | |
| Bacterial Filtration Efficiency (3.0 micron) | ASTM F2101 | 98.9 % | 1.2 % |
| Wearing Apparel Flammability | 16 CFR 1610 | Class 1 |
CLEANROOM WARNINGS
- Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
- Silicone Statement: In the past, DuPont has found that threads and zippers can be the most significant source of silicone oil contamination in garments. DuPont specifies that thread and zippers used in Dupont Tyvek® IsoClean® and ProClean® garments be manufactured without the use of silicone oils. Notwithstanding, DuPont cannot guarantee the absence of silicone oils on these garments, nor can DuPont confirm silicone oil prohibition in DuPont Tyvek® Micro-Clean® 2-1-2 produced by Cardinal Health prior to May 2008. For end uses with concerns about contamination with silicone oils or any other contaminants, the best practice is to audit inbound materials, including garments, for those contaminants.
- Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of Dupont™ Tyvek® IsoClean®, Tyvek™ Micro-Clean® 2-1-2 and ProClean® garments, and DuPont™ ProShield® 10 and DuraTrac™ shoe covers. Notwithstanding, DuPont™ Tyvek® Micro-Clean® 2-1-2 and Duratrac™ shoe covers produced by Cardinal Health prior to May 2008 may contain dry crumb natural rubber latex.
- Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637.
SPECIAL WARNINGS
- Seams and closures have less barrier than fabric.
- Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use.
- *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under the specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures may provide less barrier than the fabric. If the fabric becomes torn, abraded, or punctured, end-user should discontinue use of garment to avoid compromising the barrier protection. SINCE CONDITIONS OF USE ARE OUTSIDE OUR CONTROL, WE MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE AND ASSUME NO LIABILITY IN CONNECTION WITH ANY OF THIS INFORMATION. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or others covering any material or its use.
- Data presented does not comprise a product specification.
Search by Hazard
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by Hazard
1Choose your CHEMICAL or other HAZARDS
1Hazard
2View Permeation/Chemical Resistance Data
2Data
3View Matching Garments for Hazard Scenarios
3Garments
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Important Note
The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials or additives or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
1Choose your CHEMICAL or other HAZARDS
1Hazard
2View Permeation/Chemical Resistance Data
2Data
3View Matching Garments for Hazard Scenarios
3Garments
Step 2 of 3
Print
Done
Done
CHEMICAL COMPARISON
1Choose your CHEMICAL or other HAZARDS
1Hazard
2View Permeation/Chemical Resistance Data
2Data
3View Matching Garments for Hazard Scenarios
3Garments
Step 3 of 3
Flammable Environments
1Search by Chemical Class / Sub-class
1Class
2View Permeation/Chemical Resistance Data
2Data
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical Class Name
Chemical or Other Hazard Name
| Class Name | Sub-class Name | Actions |
|---|
1Search by Chemical Class / Sub-class
1Class
2View Permeation/Chemical Resistance Data
2Data
Step 2 of 3
1Search by Fabric Name
1Material
2Fabric Comparison
2Data
Step 1 of 2
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Fabric Name
| Fabric / Material | Actions |
|---|
Search by Guide Me
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by Guide Me
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 1 of 4
GUIDE - INTRODUCTION
Use this garment selector tool if your hazard can not be found in our database or if you would like more flexibility in the garment selection process.
Given the limitless combinations of hazard scenarios, it is not possible for DuPont to have barrier test data for all of our fabrics against all the hazards for which you need to select appropriate chemical protective garments. This is where Guide can help.
Using the guidelines established in ASTM F1186 and/or the guidance given in the OSHA Technical Manual(2), the Guide product selector tool can help you navigate the garment selection process one step at a time. From defining your hazard and exposure level, to selecting appropriate fabrics, seams and designs, Guide can help you find suitable garments for your unique set of exposure conditions.
References:
1. ASTM Standard F1186-03(2008)e1, "Standard Classification System for Chemicals According to Functional Groups", ASTM International, West Conshohocken, PA, 2003, DOI: 10.1520/F1186-03R08E01, www.astm.org.
2.OSHA Technical Manual, Section VIII, Chapter 1, Chemical Protective Clothing, III(B)(5). U.S. Department of Labor. http://www.dol.gov.
Search by Guide Me
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 2 of 4
Define Your Hazard
Evaluate only one hazard at a time. A chemical mixture, even though it may have multiple ingredients, is considered one hazard.
Search by Hazard
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 3 of 4
Hazard Exposure
Terms of UseFlammable Environments
Search by Hazard
1Introduction
1Task 1
2Define Your Hazard
2Task 2
3Define Your Exposure Level
3Task 3
4Select Your Fabric,Seam & Design
4Task 4
Step 4 of 4
Select Your Fabric,Seam & Design
Fabric Options
Seam Options 
Design Options
Search by industry/tasks
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tools - Hazard, Industry, Guide, My Scenarios and Double-check- are intended to assist in choosing protective clothing for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment, such as such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required.
Supplying the proper hazard/chemical and exposure information for your hazard scenario is criticalin order to obtain an accurate recommendation. Inaccurate information could result in an improper recommendation. To ensure that the hazard/chemical information is accurate, consult the MSDS (Material Safety Data Sheet) supplied with the chemical. DuPont DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR SUITS SELECTED USING these PRODUCT SELECTOR TOOLS, BASED ON ANY INCOMPLETE, INACCURATE, OR MISLEADING INFORMATION PROVIDED BY THE USER. There are other factors involved which could affect the final PPE (Personal Protective Equipment) decision and may not be considered in these Product Selector Tools. SafeSPEC™ Product Selector Tools provides information on DuPont suit styles for particular applications. The final decision on suit selection is the responsibility of the safety professional and end-user.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will
be unsuitable. It is the responsibility of the user to review
available data and verify that the garment selected is appropriate for
the intended use and meets all specified government and industry
standards.
Search by industry/tasks
1Choose your industry task
1Task 1
2Hazard / Exposure Scenario
2Task 2
Step 1 of 2
Dupont personal protection provides a broad portfolio
Search by industry/tasks
1Choose your industry task
1Task 1
2Hazard / Exposure Scenario
2Task 2
Step 1 of 2
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Low temperature Liquid
Multiple Hazards Found
Please refine your selection:
Chemical or Other Hazard Name
or
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Search by industry/tasks
1Choose your industry task
1Task 1
2Hazard / Exposure Scenario
2Task 2
Step 2 of 2
Hazard Exposure 
Terms of Use
Flammable Environments
SAVE SCENARIO
Please select a title for easy identification of the scenario you want to save
PLEASE NOTE:
All of the saved scenarios are going to be active only for 90 days.
You can save it again from the Saved Scenarios section from the Product Selector "Saved Scenarios" section from the Product Selector
Industry
Guide Me